ATIGO A1712, Руководство пользователя

Страница: 12 / 22

Installer setting
This section contains the device address and
system settings.
Select Installer option from the menu
DIP Switch addresses
The DIP switches are used to set the user code
for each monitor and maximum are 6 Bits.
Bit-1 ~ Bit-5 are used for addressing. The value
range is from 0 to 31, a total of 32 different
codes for 32 monitors.
Bit-6 is BUS line terminal switch, which should
be set to ON for the last monitor on the BUS
line, otherwise should be OFF
NOTE: When multi monitors are installed in the same apartment, monitors should use the same
code and the master/slave mode should be set on the monitor. (For more details, please refer to
Setting Slave Monitor)
Use reference table for setting the monitors.