ATIGO A1712, Руководство пользователя

Страница: 18 / 22

SIP tools
SIP tools are designed to help test the divert
function.
1. Select SIP tools to enter the menu
2. Chose SIP call testing to access the testing
page
•
SIP call testing count - this setting can
be set between 1~99 and it means that
the test will run automatically the set
value
•
Call interval
– this setting is set between
1~10 minutes and it means that the
system will the set value between calls
•
Retry timing
– default is 12 seconds and
is the value of retry in case of failure
•
Video quality
– setting the value to 0
means that the lowest network speed is
required for the system
3.
After all settings have been chose, select
“Start SIP call testing” and the monitor will
start immediately to divert calls to the mobile
set
NOTE: Also available in SIP tools there are the following tools:
- SIP call statistics
- Clear SIP call statistics
- View SIP call logs
- Copy SIP call logs to SD card (if available)
- View registered phones
About
Device type The device name
S/W Ver The software version
Serial No
The device’s serial number
Node ID Node ID number
IP Address
The device’s IP address
H/W Address
The device’s MAC address
Subnet Mask
The device’s subnet mask
Default Route
The device’s default route
DT Address
The device’s code number
M/S Code If the device is a master or slave
Online Show the number of sub monitors