Wireless F/T Installation and Operation Manual
Document #9620-05-Wireless FT-03
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati-ia.com • Email: [email protected]
32
LED [RED | GREEN] [ON | OFF | AUTO] => Controls indicated Digital Board
LED
This command allows you to manually control the Red and Green LEDs on the Digital Board for testing,
and then return the LEDs to automatic control.
LED1 [board: 0 | 1] [byte | AUTO] => Write byte to LED1 on the selected
Analog Board
This command allows you to manually control the LEDs on LED Port 1 of the selected Analog Board for
testing, and then return the LEDs to automatic control. For example:
>LED1 0 0x51
Board Port Value Mode
----- ---- ----- ----
0 LED1 51 TEST-output
0 LED2 22 AUTO-output
0 PWR 3f AUTO-output
LED2 [board: 0 | 1] [byte | AUTO] => Write byte to LED2 on the selected
Analog Board
This command allows you to manually control the LEDs on LED Port 2 of the selected Analog Board for
testing, and then return the LEDs to automatic control. For example:
>LED2 0 0x51
Board Port Value Mode
----- ---- ----- ----
0 LED1 aa AUTO-output
0 LED2 51 TEST-output
0 PWR 3f AUTO-output
PWR Port [board: 0 | 1] [byte | AUTO] => Write byte to PWR on the
selected Analog Board
This command allows you to manually control either Analog Board PWR port for testing, and then return it
to automatic control. PWR with no operands gives you a report on the status of the power ports:
>pwr 0 0x0f
Board Port Value Mode
----- ---- ----- ----
0 LED1 aa AUTO-output
0 LED2 22 AUTO-output
0 PWR 0f TEST-output
