Wireless F/T Installation and Operation Manual
Document #9620-05-Wireless FT-03
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati-ia.com • Email: [email protected]
30
FDIR => File System directory
This command prints the directory of the serial flash file system. For example:
>fdir
File-name Length Attr Cluster CRC
--------- ------ ---- ------- ---
abc 52 fffb 7 963d
123 20 fffb 8 3444
abcdef 26 fffb 9 44fe
3 File(s) 98 bytes 2,056,192 bytes free
FDUMP [filename] => File dump
This command prints the contents of the specified file in hex and characters. For example:
>fdump abc
000000 6162 6364 6566 6768 696a 6b6c 6d6e 6f70 abcdefghijklmnop
000010 7172 7374 7576 7778 797a 4142 4344 4546 qrstuvwxyzABCDEF
000020 4748 494a 4b4c 4d4e 4f50 5152 5354 5556 GHIJKLMNOPQRSTUV
000030 5758 595a WXYZ
FHEX [filename][hexdata] => File Write
This command allows you to enter data into a file as hex characters. Hex characters should be entered as
whole bytes only (i.e. only enter pairs of hex characters). New data is appended onto the end of existing
files. To write a brand-new file you must first delete any existing file. After you are finished writing a file
use FCLOSE to make sure that everything is saved. This command is intended to be used for downloading
Processor and WLAN Module files to be used for upgrading the Wireless F/T unit. For example, this series
of commands:
>fhex abcdef abcdef
>fhex abcdef 0123456789
>fhex abcdef 00112233445566778899aabbccddeeff
creates the file:
>fdump abcdef
000000 abcd ef01 2345 6789 0011 0011 2233 4455 ....#Eg.....”3DU
000010 6677 8899 aabb ccdd eeff fw........
FWRITE [filename][data] => File Write.
This command allows you to enter data into a file as a text string. New data is appended onto the end of
existing files. This command is for testing the file system, as it is impossible to use it to enter binary images.
GATEIP [n.n.n.n] => Set the Gateway IP
This command sets the gateway IP address.
