Atheros AP222A, Руководство пользователя

Страница: 65 / 81

COMPANY CONFIDENTIAL 64
2.5.3.2.4 Capabilities (caps)
This provides a list of the capabilities of the VAP referenced. These are output as a comma delimited string.
/etc/ath # wlanconfig ath0 list caps
ath0=3782e41f<WEP,TKIP,AES,AES_CCM,HOSTAP,TXPMGT,SHSLOT,SHPREAMBLE,TKIPMIC,WPA1,WPA2,BURST,WME>
The capability strings are defined as follows:
WEP WEP Available AHDEMO Ad Hoc Demo Mode BURST Frame Bursting capable
CKIP
CKIP Available
SHPREAMBLE
Short GI Preamble available
AES_CCM
AES CCM
HOSTAP Host AP Mode WPA2 WPA 2 available PMGT Power Management Available
SHSLOT Short Slot available AES AES OCB available TXPMGT TX Power Management
WPA1
WPA 1 available
IBSS
IBSS Mode available
TKIPMIC
TKIP MIC available
TKIP TKIP Available SWRETRY TX Software Retry WME WME capable
TURBOP
ATH Turbo available
MONITOR
Monitor Mode
2.5.3.2.5 WMM Configuration (wme)
This listing provides the current settings of the VAP’s WME settings. The listing is as follows:
/etc/ath # wlanconfig ath0 list wme
AC_BE cwmin 4 cwmax 6 aifs 3 txopLimit 0
cwmin 4 cwmax 10 aifs 3 txopLimit 0
AC_BK cwmin 4 cwmax 10 aifs 7 txopLimit 0
cwmin 4 cwmax 10 aifs 7 txopLimit 0
AC_VI cwmin 3 cwmax 4 aifs 1 txopLimit 3008
cwmin 3 cwmax 4 aifs 2 txopLimit 3008
AC_VO cwmin 2 cwmax 3 aifs 1 txopLimit 1504
cwmin 2 cwmax 3 aifs 2 txopLimit 1504
See section 2.5.2.5 for details on the parameters output.
2.5.3.3 Deleting a VAP
The delete interface is the simplest interface. Note that the VAP must be down to avoid any unpleasant interaction with
other VAPs prior to deleting. The form of the command is as follows:
# wlanconfig ath N destroy
This command applies only to the VAP interface specified.