Atheros AP222A, Руководство пользователя

Страница: 20 / 81

COMPANY CONFIDENTIAL 19
2.4.2 Radio Configuration Page
This page includes the radio parameters for each radio on the AP. This example is for a dual concurrent AP, a single
radio AP would only show a single column. Note that indexed variables here are per Radio as opposed to per VAP.
Figure 4 Radio Configuration Page
Table 4 Radio Configuration: Page Parameters
Parameter Env Var Description
Channel AP_PRIMARY_CH
AP_PRIMARY_CH_2 Indicates the channel selected for the AP. Invalid channels will cause the AP to fail on
startup.
Mode AP_CHMODE
AP_CHMODE_2
Specifies the channel operating mode. See Table 7
Channel Operating Modes
and section 3.1.3 for details
Gating Index SHORT_GI
SHORT_GI_2 Enables half period Gating Index. Disable forces full period gating index.
Aggregation AMPDUENABLE
AMPDUENABLE_2 Enables/Disables aggregation for the radio
Agg Frames AMPDUFRAMES
AMPDUFRAMES_2 Maximum number of frames to include in an aggregate.
Agg Size AMPDULIMIT
AMPDULIMIT_2 Maximum size (in bytes) of an aggregate
Agg Min Size: AMPDUMIN
AMPDUMIN_2 Minimum number of bytes to send as an aggregate
Channel Width CWMMODE
CWMMODE_2 Channel Width Mode (PHY mode). 0 sets to static 20 MHz mode, 1 sets to dynamic 20/40
MHz mode, and 2 sets to static 40 MHz mode.
Tx Chainmask TX_CHAINMASK
TX_CHAINMASK_2 Transmit chainmask. Selections vary between devices
Rx Chainmask RX_CHAINMASK
RX_CHAINMASK_2 Receive chainmask. The number of receive chains to use (not necessarily antennas).
Selections vary between devices.