Atheros AP222A, Руководство пользователя

Страница: 15 / 81

COMPANY CONFIDENTIAL 14
Variable Default Description
AP_STARTMODE standard Mode for apup execution
standard
Creates a single AP
rootap Creates a single WDS mode AP
client Creates a single WDS station instance.
repeater Creates a WDS repeater containing an AP and client
multi Creates a multiple VAP configuration
multivlan Puts each VAP on a desired VLAN interface
AP_RADIO_ID# 0
1 For dual concurrent devices, the radio ID (0 for the “lower” slot, and
1 for the “upper” slot) must be identified for each VAP. When dual
concurrent mode (as opposed to multi mode) is selected, the radio
ID of the first VAP (ath0) is set to 0 and the second VAP (ath1) is
set to 1. In the following entries the radio parameters with the _2
suffix refer to settings for Radio 1 (the “second” radio).
AP_MODE# ap For each VAP, the “mode” of the AP is required. The mode is used
to initialize the VAP. The following are the available modes:
ap
Infrastructure access point
sta Simple station VAP (not normally used alone)
ap-wds WDS (4 address frame) format interface that WDS
stations can connect to. See ROOTAP_MAC.
sta-wds Client WDS interface that connects to an Infrastructure
WDS interface, creating a WDS bridge between the
two devices. Also see ROOTAP_MAC.
AP_PRIMARY_CH
AP_PRIMARH_CH_2 6
40 Indicates the specific channel to set the AP to. Setting to a value of
“11ng” will cause the AP to scan for a free 11g (2.4 GHz) channel.
A value of “11ng” will scan for a free 11g (2.4 GHz)
channel. Note that the selected channel should match the extension
channel (PLUS or MINUS) mode appropriate for the selected
channel/regulatory mode.
AP_CHMODE
AP_CHMODE_2 11NGHT20
11NAHT40PLUS Specifies the channel operating mode. See Table 7 Channel
Operating Modes
and section 3.1.3 for details.
ROOTAP_MAC This is used for clients, and will set the preferred MAC address for
the repeater client to associate to. In WDS mode, this is provided to
the client device, and is the MAC address of the WDS VAP on the
root AP device.
AP_VLAN# For each VAP that is associated to a VLAN, this parameter
identifies the VLAN ID for the VAP.