5
6
After the installation and wiring is done, connect the Charger to a computer and configure
parameters via the web browser of the computer, then the Charger can be ready for use.
IV.
Parameter setting
4.1 Set computer’s IP
The Charger’s default IP address is 192.168.1.5. To access the parameter setting interface,
you’ll need to first set the computer’s IP to 192.168.1.x(x can be any value between 1 and
255 except for 5, e.g. 192.168.1.10).
To set a static IP on your Windows computer:
1. Click
Start Menu
>
Control Panel
>
Network and Sharing Center.
(For Windows 8 and
higher, search for and open Control Panel and select Network and Internet).
2. Click
Change adapter settings.
3. Right-click on
Local Area Connection
and click on
Properties
.
4. Select
Internet Protocol Version 4 (TCP/IPv4)
and click on
Properties
.