17
18
5.2 LCD interface introduction
Interface of standby status.
Charging mode is displayed at the bottom centre of
the screen.
Interface of user card information
Displayed for user to check card ID and balance when
swiping RFID card while EV is not connected
Interface of charging status.
Displayed when the charging is being carried out.
There is charging time, consumed electricity,
charging cost on it, as well as real-time charging
voltage and charging current.
Interface of charging complete.
Displayed when the EV stops charging, or forced
on/off button is pressed on charger side.
Interface of billing.
After scanning QR code or swiping RFID card for
billing, this interface will open up to display user
ID/charging time/cost/balance, etc.This interface will
also come out when you stop charging on the Project
EV APP or when you press the forced on/off button
or unplug the gun at Plug&Charge mode.
Interface of fault status.
Displayed with fault code and fault description when
fault occurs.
Interface of reserved status.
If the back-office server and APP support reservation
function and the charger is reserved, this interface
will come out showing user ID and remaining time to
reserved time.
Press the menu button to enter the charge
station setting interface
Interface of charge setting
In the charging setting interface,you can choose
A or B to start and stop
Interface of unlock setting.
In the electromagnetic lock failure state, you can
choose to unlock A or B
Interface of language setting.
You can choose English or Chinese
Interface of Charge mode setting.
You can set different charging control modes
( APP/RFID
、
RFID
、
Plug&Charge)