ATEN VK1100, Руководство пользователя

Страница: 96 / 176

ATEN Control System User Manual
86
Adding Commands
The Button Action section allows you to add and configure commands – to set
what a button does when pressed. You can configure a button with Device
commands (On, Off, Stop, Play, etc.); as a Macro to send multiple commands
to one or more devices; or as a Link to other viewer pages. Advanced Options
allow you to add conditions to the commands, as described on the next page.
To add a command to the button:
1. Under Device , select a Room and then an option.
2. Select a command from the Function list.
3. Double-click the command to add it to the Commands list.
The commands listed under Function depend on which option is selected
in the Device list.
4. Use the information below to understand how each Button / Slider Bar
Action section works and how to add Advanced Option to commands.
Š
Device – lists hardware devices and advanced options that can be selected
to add commands to the Commands list. Commands appear in the
Function list. Only hardware devices from the Room that is selected (via
the drop-down menu) are listed here. The controller is listed first and
allows you to add
Special commands, as explained under Function , on
page 87. In addition to hardware device commands, you can add options:
Macro – sends multiple commands to one or more devices. Select to
add a macro command from the Function list. To create a macro, add
multiple device actions to the Commands list, then click the Save as
Macro icon or use the Advanced Editor (page 104).
Link – makes the button into a link that directs you to a viewer page.
Select to add a page link from the Function list. Double-click the
page link in the Commands list to select a different page link.