ATEN VK1100, Руководство пользователя

Страница: 68 / 176

ATEN Control System User Manual
58
Project
The Project tab allows you to enter details about the installation to start the
project. Enter the information using the table below as a guide.
Name Enter the project name you are setting up. You can create multiple
projects but for most installations only one project is required.
Add Controller Click to add Control Boxes to the project. The number added
should equal the number of Control Box units being installed. A
project can have up to 16 Control Boxes. A Controller is the
software link to the Control Box being installed.
Controller ID Displays the Controller ID for the Control Box in the project. Use
the Controller ID in the project to set the
Controller ID Switch on
the rear of the Control Box.The device configuration and viewer
profile will be uploaded to the Control Box set with the same ID.
ATEN Controller
Type Select the Control Box model you are installing.
Number of Rooms Enter the number of rooms each Control Box will control. Each
hardware device you add will be associated with a room. When
buttons are configured in the
Design tab, you can select a Room
under Button Action to filter the Device list so that only hardware in
that room appears. This link between the Control Box, devices and
room is how the viewer profile knows which devices to control.
Name Enter the client name associated with the project.
Address Enter the client address associated with the project.
Phone Enter the client phone number associated with the project.
Remove Controller Click to delete a Control Box from the project.
Start Project Click to begin configuring hardware devices. The Select Device &
Configuration tab will open.