ATEN VK1100, Руководство пользователя

Страница: 142 / 176

ATEN Control System User Manual
132
„
IR
Click to add an Action.
Click to create a duplicate of the Action
Click to delete the selected action.
Š
Settings – Use the drop-down menu to set the Repeat setting (number of
times a signal is sent): 1 Time , 2 Times or 3 Times (Default) .
Š
Advanced – Click to use the Delay Interval drop-down menu to set a
timed delay for each command before it is sent to the device.
Š
Function List – Use this section to configure the IR functions by adding
actions to the list.
Quick Mode – Click to run Learning Mode for all IR actions in the
Function List. When the Quick Mode window opens, click Start , a pop-
up window appears to select a controller. Check a box to select a
controller and click Select. Click
Start a second time to run Quick
Mode using the Learn instructions below.
Function – Lists the actions created for a device. Double-click to edit
the Function the name.
Status – Reports the status ( Tested , Failed , Learned ) of the Learn and
Test buttons.
Learn – Use to transfer commands from an IR remote to the Control
Box.
Click Learn , a pop-up window appears to select a controller. Check
a box to choose a controller and click Select .