CS1842 / CS1844 User Manual
40
RS-232 Commands
After you login via HyperTerminal (see
) use
the instructions below to send RS-232 commands to control the switch from the
computer.
When RS-232 control is enabled via the
Open
+
[Enter]
command, the
CS1842 / CS1844’s front panel pushbuttons, mouse switching, hotkeys, and
remote port selector will be disabled.
Verification
After entering a command, a verification message appears, as shown below, at
the end of the command line, as follows:
With all commands in the sections that follow:
Each command string can be separated with a space.
The [Enter] command can be replaced with the ASCII code: 0x0D0A
Response Message
Description
Command OK
Command or parameter is correct.
Command incorrect
Command or parameter is incorrect.
Содержание CS1842
