ATEN CS1842, Руководство пользователя

Страница: 17 / 88

Chapter 1. Introduction
5
Components
CS1842 Front View
CS1844 Front View
No. Component Description
1 mode selection
pushbutton

This pushbutton allows you to cycle through the four focus
modes – complete, KVM, audio, and USB.

Press and hold mode selection pushbutton before powering on
and to enter Firmware Upgrade Mode.
2 port selection
pushbuttons For manual port selection (see Manual Switching , page 17):

Press a port selection pushbutton for longer than two seconds to
only bring the KVM focus to the computer attached to its corre
-
sponding port.

Press a port selection pushbutton twice to bring the audio focus
to the computer attached to its corresponding port.

Press a port selection pushbutton for less than two seconds to
bring the KVM, USB hub, and audio focus to the computer
attached to its corresponding port.
Note: This function is disabled when the fast switching
mode is enabled, see Switching Mode Selection , page
31.

Press switches 1 and 2 simultaneously for 2 seconds to start
Auto Scan Mode (see
Auto Scanning , page 25).

Press switches 3 and 4 simultaneously for 2 seconds to perform
a Keyboard/Mouse reset.
Note: This feature is for CS1844 only.
3
2 1 2
4 5
3
2 1 2
4 5