ATEN CL3100, Руководство пользователя

Страница: 23 / 78

Chapter 1. Introduction
13
No. Component Description
1 Upper Handle
With Release Bar
Pull to slide the LCD module out; push to slide it in.
See Opening / Closing the Console , page 31, for details on
sliding the console in and out
2 LCD Module After sliding the LCD module out, flip up the cover to access
the LCD display.
3 LCD Controls The buttons to control the position and picture settings of the
LCD display are located here. See page 37, for details.
4 LCD On / Off
Button
Push this button to turn the LCD monitor on and off. The
button lights when the LCD monitor is off.
Note: The light indicates that only the monitor is off, not the
attached KVM switch.
5 Firmware
Upgrade Switch During normal operation and while performing a firmware
upgrade, this switch should be in the NORMAL position. If a
firmware upgrade operation does not complete successfully,
see
Upgrade Failed , page 48 for details on how to recover
the situation.
6 Firmware
Upgrade Port The firmware upgrade cable that transfers the firmware
upgrade data from the administrator’s computer plugs into
this 3.5 mm audio jack.
7 Reset Switch Located to the right of the Lock LEDs. Press this recessed
switch in with a thin object to perform a system reset.
8 Lock LEDs The Num Lock, Caps Lock, Scroll Lock LEDs are located
here.
9 Rack Mounting
Brackets
Rack mounting brackets are located at each corner of the
unit. See Standard Rack Mounting , page 19, for details.
10 Power LED Lights (green) to indicate that the unit is receiving power.
11 USB Port The USB port is available to connect a USB peripheral
device (flash drive, CD-ROM drive, etc.) to the console, or a
USB mouse for users who prefer to use an external mouse.
12 Touchpad Standard mouse touchpad.
13 Keyboard Module Standard 105-key keyboard.
14 LED Illumination
Light
Illuminates the keyboard and touchpad to allow visibility in
low-light conditions.
15 Exit/Light
Pushbutton
Press the Exit/Light pushbutton for two seconds to turn the
LED Illumination Light On or Off. (Default: On)