ATEN CCKM, Руководство пользователя, Страница: 377 / 466

Chapter 14. CLI Commands
353
Switch Port Command
The formula for Switch Port commands is as follows:
C Num1 + Input + Num2 + Mode +
Connect
+
[Enter]
1. For example, if you want to switch the Receiver’s connection to
Transmitter (192.168.0.20), type the following:
sw i192.168.0.20 [Enter]
2. For example, if you want to disconnect the Receiver from its Transmitter
connections, type the following:
sw off [Enter]
3. For example, if you want to connect Receiver (192.168.0.99) to
Transmitter (192.168.0.79) with exclusive access to stream video and
audio, type the following:
sw o192.168.0.99 i192.168.0.79 exclusive video audio on [Enter]
4. For example, to disconnect Receiver (192.168.0.11) from the video stream
and return it to the OSD menu, type the following:
sw o192.168.0.11 off [Enter]
5. For example, to disconnect Receiver (192.168.0.09) from the video stream
and logout the OSD, type the following:
sw o192.168.0.09 logout [Enter]
6. For example, to disconnect the Receiver’s USB stream, type the
following:
sw usb off [Enter]
7. For example, to switch the Receiver to the 5th Transmitter listed in the
command line interface, type the following:
sw i@5 exclusive all on [Enter]
8. For example, to switch the Receiver to the 7th Transmitter listed in the
command line interface with echo command 4312, type the following:
sw i@7 exclusive all on e4312
9. For example, to switch Receiver (192.168.0.12) to the 14th Transmitter
listed in the command line interface with occupy access to stream video
audio and USB, type the following:
sw o192.168.0.12 i@14 occupy video audio usb on [Enter]