ATEN CCKM, Руководство пользователя, Страница: 358 / 466

KVM over IP Matrix System User Manual
334
Click
OK
to save your changes and close the dialog box.
Click
Cancel
to abandon your changes and close the dialog box.
Note: For best results, change the gamma while viewing a remote computer.
Video Quality Drag the slider bar to adjust the overall video quality. The larger
the value, the clearer the picture and the more video data goes
through the network. Depending on the network bandwidth, a
high value may adversely affect response time.
Enable Refresh The unit can redraw the screen every 1 to 99 seconds,
eliminating unwanted artifacts from the screen. Select
Enable
Refresh and enter a number from 1 through 99. The unit will
redraw the screen at the interval you specify. This feature is
disabled by default. Click to put a check mark in the box next to
Enable Refresh to enable this feature.
Note: 1. The switch starts counting the time interval when
mouse movement stops.
2. Enabling this feature increases the volume of video
data transmitted over the network. The lower the
number specified, the more often the video data is
transmitted. Setting too low a value may adversely
affect overall operating responsiveness.
Transparency Drag the slider bars to adjust the transparency of the remote
display.
Color Depth Control This setting determines the richness of the video display by
adjusting the amount of color information.
Option Usage