ATEN ATEN VanCryst VM1600A, Руководство пользователя

Страница: 155 / 204

Chapter 5. CLI Commands
141
Audio Commands
Use audio commands to embed/de-embed inputs into a digital audio output or
turn on/off an audio output. Note that these commands are only applicable
when you have the required I/O boards installed to the matrix switch. For
example, the VM7804 / VM7814 / VM7824 and the VM8804 / VM8814 /
VM8824.
The formula for the audio command is as follows:
C (Input + Num 1) + Num3 + (A Device Num)
+ Num3 + C [Enter]
Examples:
 To embed the analog audio from input port 2 to the stream at output port 1,
type the following:
sw i02 o01 sido [Enter]
 To de-embed the analog audio from a digital input at port 1 and assign the
audio to the analog audio output at port 2, type the following:
sw i01 o02 diso [Enter]
 To assign an analog audio input at port 2 to an analog audio output at port
1, type the following:
sw i02 o01 siso [Enter]
 To turn off the analog audio at output port 1, type the following:
sw o01 audio off [Enter]
The following tables show the possible values for the audio command:
Command Description
sw Switch command
Output Description
o Output port command
Num1 Description
xx Output port number
xx: 01~16 (default is 01)