ATEN ATEN VanCryst VM1600A, Руководство пользователя

Страница: 47 / 204

Chapter 1. Introduction
33
VE805R / VE816R Front View
VE805R / VE816R Rear View
No. Component Description
1 LEDs Three LEDs – Power, Link and HDMI Out – light when the
unit is properly connected to an appropriate source.

Power - lights Green to indicate the unit is receiving
power.

Link - lights Orange to indicate that communication
between VE805R / VE816R and output board is estab
-
lished.

HDMI Out - lights Orange to indicate the HDMI output
signal is good. LED blinks Orange every second to indi
-
cate that the device is in F/W upgrade mode.
2 IRPort Connect the IR transmitter or receiver cable port into this
mini stereo jack port.
3 RS-232 Port Use the captive screw connectors (3 pole) to connect the
cable from your serial device into the RS-232 port.
4 HDMI Output Port Connect the cable from your HDMI display device
(monitors, projectors, TVs) into this port.
5 Firmware
Upgrade Switch Set this switch to OFF (left) for normal operation. Set this
switch to ON (right) and reset the unit’s power to enter
firmware upgrade mode. For details, see
System Setup ,
page 128.
6 HDBaseT Input Use a Cat 5e cable to connect the VE805R / VE816R to
the VM8514 output board.
7 Power Jack The power adapter cable plugs connects here.
5 4 2 3
1
7 6