ATEN ATEN VanCryst VM1600A, Руководство пользователя

Страница: 173 / 204

Chapter 5. CLI Commands
159
Scaling Command
The Scaling command allows you to set a resolution for scaling the display
connected to an output port.
The formula for the Scaling command is as follows:
C Number 1 + A Number 2 + Horizontal
Reso Number 3+ Vertical Reso Number 4 + Frequency
+ Number 5 + C [Enter]
1. For example, to turn scaling off for output port 02, type:
scaling o02 off [Enter]
2. To set the scaling for output port 04 to 1920x1080@60Hz, type:
scaling o04 1080p [Enter]
3. To set the scaling for all output ports on all devices to the connected
display’s native resolution, type:
scaling o* a* native [Enter]
The following tables show the possible values for the Scaling command:
Command Description
scaling Scaling command
Output Description
o Output command
Num1 Description
yy Output port
yy: 01~16 (default is 01)
* All output ports
Address Description
a Device address command
(RS-422 and RS-485 only)
Num2 Description
zz Device Address
zz: 01~16
(RS-422 and RS-485 only)
* All Devices