ATEN ATEN VanCryst VM1600A, Руководство пользователя

Страница: 159 / 204

Chapter 5. CLI Commands
145
Note: 1. Each command string can be separated with a space.
2. The Address command is for RS-422/485 only. If the address
parameter is missing from RS-422/485 commands, the default a00
will be used. Skip the address for RS-232 commands.
3. Skip the Output command to mute or enable the audio of all output
ports.
The following table shows the available command list:
off Mute off; audio on output port is enabled
(default)
Command Output Num1 Address
Num2
Control Enter Description
mute o xx
*
a zz
*
on [Enter] Mute audio for
output port xx,
on device zz
xx:01~16, *
zz: 01~16,*
mute o xx
*
a zz
*
off [Enter] Turn mute off for
output port xx,
on device zz
xx:01~16, *
zz: 01~16,*
Control Description