ATEN Altusen KN9008, Руководство пользователя

Страница: 137 / 178

Chapter 11. AP Operation
123
A description of the Connection Screen is given in the following table:
Server List Each time the WinClient.exe file is run, it searches the User's
local LAN segment for KN9008 / KN9016 units, and lists
whichever ones it finds in this box. If you want to connect to
one of these units,
double-click it.
Server This area is used when you want to connect to a KN9008 /
KN9016 at a remote location. You can drop down the
IP list
box and select an address from the list. If the address you
want isn't listed, you can key in the IP address you want.
Then, key in the Port number in the
Port field. If you don't
know the Port number, then contact the Administrator.
Š
When the IP address and Port number for the unit you wish
to connect to have been specified, click
Login .
Š
When you have finished with your session, Click Logout .
Remote View Once contact with a KN9008 / KN9016 has been established,
this button becomes active. Click it to switch and take over
console control of the unit that is attached to the KN9008 /
KN9016.
The screen output of the unit appears on your monitor. Your
keystrokes and mouse movements are captured and sent to
the KN9008 / KN9016 to be executed on the attached unit.
If the KN9008 / KN9016 is connected to a KVM switch, you
can control the switch and the computers connected to it just
as if you were connected locally.
Change Password This button becomes active after a connection to a KN9008 /
KN9016 unit has been established. It allows the User to
change the password used to log in to the KN9008 / KN9016.