ATEN ALTUSEN KM0432, Инструкция по эксплуатации

Страница: 38 / 80

Cascaded Physical Interface Installations:
Under Physical Interface Expansion, KH0116s are cascaded down from the
KM0432. Since the OSD protocols are different, there are separate OSDs for
each. When you invoke the OSD (see p. x), the KM0432 OSD screen comes up
first. When you select the port that the target KH0116 is connected to, its OSD
screen replaces the KM0432’s, and you can select the computer you want to
access from the KH0116 OSD screen.
Aside from this difference, the port numbering follows the examples shown
above.
User Management and Security
The KM0432 permits the creation of 6 operator profiles when the switch is
either on a stand alone installation or is the Master switch of a multilevel
installation, as follows:
M
1 Super Administrator
M
1 Administrator
M
4 Users
On a single stage installation, four operators have simultaneous and
independent control of 32 computers. In a daisy chained installation, a
maximum of 32 operators can access the chain simultaneously (8 KM0432s x 4
operators each). Each Slave KM0432 also has 6 operator profiles, as above.
Note: 1. The Super Administrator can log in on a slave unit, but his authority
only governs the segment he logs in on - just like that of an ordinary
Administrator.
2. Operator profiles are different from actual operators. The KM0432
has four console ports and allows four actual operators to access the
switch simultaneously. Operator profiles specify the rights assigned
to particular operators. Theoretically, one operator can use the same
operator profile to occupy all 4 console ports.
The Super Administrator has administrative power over the whole chain, he
can assign and change passwords and access rights for all operators on all
segments (see SET USERNAME AND PASSWORD, p. 40, and SET
ACCESSIBLE PORTS p. 42).
2003-12-15
30