ATEN Altuscn PN5212, Руководство пользователя

Страница: 55 / 153

Chapter 5. Outlet Access
41
Outlet Level Configuration
The configuration settings for a PN5212 / PN5320 can be specified on an outlet
by outlet basis. When an outlet is selected in the Configuration page Sidebar,
the main panel displays a page with two tabs:
Configuration , and Schedule , as
described in the sections that follow.
Configuration
The Configuration tab page, similar to the one below, is the default that appears
in the main panel.
This page lets you set up the power management configuration for the selected
outlet. The meanings of the field headings are given in the table on the
following two pages:
Heading Meaning
Outlet Name Each outlet can be given a distinctive name. The maximum
number of characters is 15.
Confirmation Required If this option is enabled (there is a check in the checkbox), a
dialog box comes up asking you to confirm a power operation
before it is performed. If it is disabled (there is no check in the
checkbox), the operation is performed without confirmation.
Power On Delay Sets the amount of time the PN5212 / PN5320 waits after the
Power Button is clicked (see
Manual Power Management ,
page 25), before it turns on the computer attached to the
corresponding outlet.
Note: The default delay time is 0 seconds; the maximum is 999
seconds. When a series of outlets are scheduled to be
powered up, they turn on in sequence with a default delay of 10
milliseconds between each outlet.