ATECH ACK700 Скачать руководство пользователя страница 21

Страница: 21 / 38

All directives, recommendations and general safety rules contained in this manual have to be observed fully.

The machine cannot be operated in any way for purposes other than those described herein. Otherwise, the

manufacturer shall not be deemed responsible for any damages or injuries. And such circumstances would lead

to the termination of the warranty

General Safety Information

The power cable should be led in such a way that nobody can step on it or nothing can be placed on it. Special

care has to be taken regarding the inlet and outlet sockets

Don’t overload machines for drilling and cutting. Your machine will operate more safely with power supply in

accordance with the stipulated values.

Use correct illumination for the safety of the operator. (ISO 8995-89 Standard The lighting of indoor work sys-

tem)

Use correct illumination for the safety of the operator. ( ISO 8995-89 Standard The lighting of indoor work sys-

tem)

Don’t use any materials other than those recommended by the manufacturer for cutting operations on the

machine.

Ensure that the work piece is clamped appropriately by the machine's clamp or vice

Ensure safe working position, always keep your balance.

Содержание ACK700







































Результаты поиска

Содержание ACK700

Отзывы:

Похожие инструкции для ACK700

Бренды по названию

Популярные бренды

ATECH ACK700, Руководство пользователя

Результаты поиска

Содержание ACK700

Отзывы:

Похожие инструкции для ACK700

Бренды по названию

Популярные бренды