ATECH ACK700, Руководство пользователя

Страница: 26 / 38

1. Preparation
1. Degrease and dry the machine table. Especially ensure that the holding grips and handles are clean and dry.
2. Clean all surfaces of the machine from chip and foreign particles. Use eye glasses for protection.
3. This machine can process on products manufactured from rigid plastic and aluminum materials that don’t in-
clude iron alloy.
4.
Control whether cutting tool (FIGURE 3 NO.34-26) is inserted safely to their places.
5.
Control cutting tools against corrosion, distortion and fractions. If cutting tools are damaged, change them.
6.
Cutting tool must process on the part after machine is operated and cycled.
7. Definitely check the direction of rotation of the saw blade.
8.
Do not process the profile before clamping the work piece properly.
26