AWM-AD Page 4 of 4
8.
Cable management
8.1
Plug cables into the monitor and
route the cables down the arm using
the cable hooks and clips.
atdec.com | atdec.co.uk | atdec.com.au
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20180724
See steps
8.2
to
8.4
8.2
Wedge cable into the central gap
and slide it down the arm.
8.3
The cable should slip into the arm cavity
8.4
Slide the remaining loose cable
from the central gap up the arm.
Important!
Ensure enough cable slack is
given in this area to allow for
movement of the monitor.
