Applied Thermal Control Ltd
39 Hayhill Industrial Estate
Barrow-upon-Soar, Loughborough
LE12 8LD, United Kingdom
+44 (0) 1530 839 998
[email protected]
[email protected]
Installation, Operation & Service Manual
MPC3 / MPC10 / MPC18 / MPD3
DOCUMENT DETAILS
Date 28/OCT/2020
Author(s) MJH
Page 4 / 5
Revision 4
SAFETY NOTICES
For your safety, we draw your attention to the following warning and caution marks throughout the manual; the
safe operation of an ATC chiller always remains the responsibility of the operator. This equipment is intended to
be used as a liquid temperature conditioning device
– it requires no external pump, nor any further manipulation
of temperature.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired.
Caution; Failure to comply with a caution will invalidate product warranty and absolve ATC from any
liability, howsoever caused, and could result in permanent damage to equipment.
Caution; Filling/topping up of the tank should only be undertaken with the unit switched off, to prevent
back-filling of the fluid.
Caution; The high integrity refrigeration system contains no user-serviceable parts. Repair and service
requires specialized knowledge and tools to be provided by ATC or its local agent. Any unauthorized
tampering with the refrigeration system automatically invalidates warranty.
Warning; Very cold surfaces and gases, lower than -20°C (-40°F). Severe frostbite hazard.
Warning; Opening the refrigeration system may expose the operator to toxic and corrosive compounds
(HFCs). Take protective measures including suitable eye protection.
Warning; Gases may exceed 15 barg (220psig) during operation.
Warning; Refrigerant is class A1. It does not support combustion but is oxygen depleting. Refrigerant
charge in the Mini is 360g (12.7oz) of R134a.
Warning; Water and electricity are in close proximity. Always ensure the unit is isolated before service.
The Mini is protected from overcurrent by mains fusing. Never bypass this component.
Warning; Failure to comply with a ‘warning’ may result in personal injury or death. ATC does not accept
any liability for injury caused through use of this equipment.
Warning; After switching off, the fan blades slow to a stop. Do not open until the fan has stopped
rotating.
Affixed to the chiller’s fan, this symbol printed on yellow background advises of the possible damage to
fingers or other extremities from rotating fan blades. Allow blades to stop before service begins.
Opening section MPC3, 10, 18 & MPD3
4
