SERVICING
We recommend that you read the SAFETY NOTICES section thoroughly before beginning service.
Control Panel
Switch off power to the game. Open the coin door. Reach through the coin door opening up inside
the control housing toward the right and left sides of the cabinet. The control panel is held in place by
two latches inside the cabinet which provide constant pressure on the strikes. Lift each latch handle
and unhook the wire fasteners. Grip the joysticks and carefully tilt the control panel back on its hinge.
To return the control panel to its normal position, slowly lean it forward until it rests on the cabinet. Do
not to let the control panel slam down onto the housing. Inspect for binding or pinched wires before
re-clasping the latches. Grip the joysticks and verify complete latch on both sides of the panel.
Viewing Glass
Switch off power to the game. Open the control panel as described above. Loosen three mounting
screws and slide the black metal strip from the bottom of the glass. Carefully slide the glass from the
side grooves, then lift clear of the cabinet and set in a safe place. Clean the glass before reinstalling.
Monitor Bezel
Switch off power to the game. Open the control panel and remove the viewing glass as described in
the paragraphs above. Lift the bezel up off of the monitor and set aside. Clean the labels and orient
them so they can be read correctly (not upside down) when the bezel is reinstalled.
Marquee
Switch off power to the game. Remove the hex-head screws from the black marquee retaining strip
located at the top of the header.
Remove the strip and carefully lift the marquee and the marquee
glass from the top of the header and set in a safe place. Clean the glass before reinstalling.
Speakers
Switch off power to the game. Remove the marquee and the marquee glass as described above.
The grill and the speakers come out from the front of the cabinet.
Be sure to disconnect the cabling
and remove the nuts on the mounting screws before attempting to remove the speakers from the
enclosure. Carefully reinstall the seals upon completing any task in the speaker enclosure.
Coin Counter
Switch off power to the game. Unlock the cash door and swing it open. Remove the cash tubs. The
meter is located on a plate at the vault bottom. Remove the screws and lift the plate just enough to
disconnect the meter wires from the harness. Record the meter count before testing or replacement.
Fluorescent Light Assembly
Switch off power to the game. Remove both marquee glass and marquee. Remove both plastic lamp
locks. Grasp the bulb at each end and give it a quarter turn. Gently pull the bulb straight out to remove
it from its sockets. The starter also requires a quarter turn for removal. Do not force the bulb or
starter during reinstallation. Clean the bulb to remove fingerprints and dust, then reinstall marquee.
To remove the entire light fixture, remove the lamp locks and the bulb as described above.
Disconnect the fluorescent light assembly connector from its power cable.
Remove the screws that
hold the assembly to the cabinet, then lift out the assembly.
!!
WARNING !!
tube
or a CRT and it breaks, it will implode! Use care in handling.
l-6
Содержание RAMPAGE WORLD TOUR
Страница 41: ...CABINET WIRING DIAGRAM 3 4 ...
