manualshive.com logo in svg

Atari RAMPAGE WORLD TOUR, Руководство по эксплуатации

Поделиться
Скачать
Atari RAMPAGE WORLD TOUR Скачать руководство пользователя страница 4

8.

9.

10.

11.

The power cord is with the spare pans. Remove and save four screws from the line cord cover plate
at the rear of the cabinet. Match the holes on the 

 plug with the prongs in the receptacle and push

firmly to seat the line cord.

Hold the cord flat against the cabinet and reinstall the cover plate (the

indentation should point down so that the cord exits toward the bottom of the cabinet).

 

 

  s h o w n

 reference 

Line Cord   Plug

Reinstall the rear door onto the cabinet and close it. Lock the rear door and remove the key. If
required, install the extra padlock through the hasp at this time. Install the screws at the top and sides

of the rear door and tighten snugly. Close and lock the cash box and coin doors.

NOTE

Tamper resistant screws and matching wrench are provided with this game for additional security.

Four tamper resistant screws and one wrench are located in the spare parts bag. If desired, replace

the original screws with the tamper resistant screws. Tighten the screws firmly with the wrench.

Move the game to its intended location. Lower each leg leveler until the cabinet is stable and level.
Adjust the levelers as required to distribute weight equally on each corner. Tighten the nuts firmly.

Plug the game into a grounded 

 AC wall outlet. Switch ON the game, using the ON/OFF

switch located on the upper left rear of the cabinet.

The game will power up and begin 

 If no errors are found. the aame will 

 enter its ‘attract” mode of operation.

1-4

Содержание RAMPAGE WORLD TOUR


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды