Atari RAMPAGE WORLD TOUR, Руководство по эксплуатации

Страница: 10 / 49

Memory
The ROM (Read Only Memory) circuits contain the computer operating instructions. Memory devices
are especially sensitive to static charges. Use grounding precautions when handling these parts.
Switch off power to the game. Carefully note the position, then remove using a chip extraction tool.
To reinstall memory circuits, orient a chip over its socket and press firmly to seat pins. Do not force.
A
touching the power supply chassis. This is to be done BEFORE touching
or handling the electronic assemblies.
Battery
Switch off power to the game. Carefully note the position, then gently lift the contact arm to release
tension. Do
not bend the arm. Slight finger pressure may be needed to pry the cell from its holder.
To reinstall the battery, orient cell near its holder and slide it in under the contact arm. Do not force.
CAUTION Danger of explosion if battery is incorrectly replaced.
Replace on/y with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to instructions printed
on the battery or the manufacturers packaging.
NOTE: To avoid explosion, all replacement batteries must match the original in size, voltage rating,
and composition. Manufacturer recommended equivalent types are acceptable. Do not attempt to
recharge these batteries: remove them from their holders and store in a safe place until repairs have
been completed. Avoid direct shorts across terminals or from terminals to ground! Dispose of used
batteries according to the manufacturer’s instructions.
MAINTENANCE
Viewing Glass
It is not necessary to switch off power to the game to clean the glass. Apply a mild glass cleaner to a
clean cloth or sponge, then use this to wipe the viewing glass. Do not apply the cleaner direct/y on
the glass! Liquid could drip down into switch or control circuits and cause erratic game operation.
Controls
Use plastic-safe non-abrasive cleaners to avoid damaging parts. Apply the cleaner to a clean cloth or
sponge, then use this to wipe controls or panel.
Do not the cleaner direct/y on the controls!
Cabinet
Use only non-abrasive cleaners to avoid damaging game graphics. Apply the cleaner to a clean cloth
or sponge, then use this to wipe screen clean.
Do not apply the cleaner directly on the cabinet!
l - 9