4
Telephone Installation
Wall Installation
1
Plug one end of the line cord into the telephone line jack.
INSTALLATION
2
Feed the line cord into the channel and wind it around and out of the
mounting area as shown.
3
Connect the other end to a telephone jack not controlled by a switch.
4
Mount the phone on the wall as shown, then continue with the steps
in “For Table/Desk and Wall Installation” on page 7.
Telephone
line jack
Line cord
Mounting
area
Modular telephone
wall jack
Channel
260book_1ATT 4/24 4/24/02 6:24 PM Page 4