New Call Light Stays On
Make sure you have reviewed all calls.
New Call Light Does Not Go On
•
Make sure you have installed four AA batteries.
•
Replace old batteries with four new ones.
Screen is Blank
•
The screen is blank until you receive a call.
•
Make sure all line cords are correctly connected.
•
Make sure you have installed four charged AA batteries.
•
You must subscribe to service from your local phone service provider
to see call information on the screen (see “About Caller Identification”
in BEFORE YOU BEGIN).
Screen Displays
Extension Used
, and None Are
Check all line cord connections.
No Caller ID Information While on a Call
•
Make sure your service provides Caller ID information while you are
on a call. This is sometimes known as “Caller ID on Call Waiting,” or
“Type II Caller ID.”
•
Make sure you have the Call Waiting feature on this phone set to
ON (see “Display Screen Options” in FEATURE SETTINGS).
•
The phone cannot display the information if another phone on the
same line is in use. Make sure all extensions are on hook.
•
Make sure you have installed four charged AA batteries
(see INSTALLATION).
•
Replace old batteries with four new ones.
IN CASE OF DIFFICULTY
25
260book_1ATT 4/24 4/24/02 6:24 PM Page 25
