background image

1

About Caller Identification (Caller ID)

This product has a Caller ID with Call Waiting feature that works with
service available from your local phone service provider.
Caller ID with Call Waiting lets you see who’s calling before you answer 
the phone, even when you’re on another call.
You may need to change your phone service to use this feature. Contact
your phone service provider if:

You have both Caller ID and Call Waiting, but as separate services 
(you may need combined service)

You have only Caller ID service, or only Call Waiting service  

You don’t subscribe to any Caller ID or Call Waiting services.

You can also use this product with regular Caller ID service, or with no
Caller ID services.

There are fees for Caller ID services, and they may not be available in all
areas.

Depending on your service, you may see the caller’s number, or the caller’s
name and number. This product can provide information only if both you
and the caller are in areas offering Caller ID service, and if both telephone
companies use compatible equipment. The time and date are sent by the
service provider along with the call information.

BEFORE YOU BEGIN

260book_1ATT 4/24  4/24/02  6:24 PM  Page 1

Содержание Trimline 260





























Отзывы: