Syn248 Installation and Configuration Guide
Device Configuration
74
Gateway Configuration
Press
UP
or
DOWN
in the Gateway Main menu until
Configuration
is highlighted, as
shown in Figure 20, and press
SELECT
to display the Configuration menu. The current
setting is indicated with
[x]
.
Figure 20. Gateway Configuration
Configuration — Current Gateway settings.
Auto IP
— Is set automatically.
Static IP
— You can change the static IP only from the Gateway. See your
network administrator if you require details regarding IP assignments.
Restore Defaults
— Highlight
Restore Defaults
and press and hold
SELECT
for two seconds when prompted to restore the Gateway to factory defaults.
Upgrade Software
— Highlight
Upgrade Software
and press
SELECT
. If new
software is available, you are prompted to press
SELECT
again to accept the
upgrade. You can use this interface or the WebUI to upgrade software.