Installing the Carrier Assembly
on a Shelf or Desk
■
■
■
You will not receive optimum performance if unit is placed on a
desk or low shelf
Install as high as possible, leaving at least 1 ½ feet (45.7 cm)
between antennas and ceiling if on high shelf
See “Key Components” earlier in this booklet for additional
picture datail
Check to make sure the carrier
1
assembly’s power cord is un-
plugged from the wall outlet before
continuing.
2
Remove the plastic cap
covering each radio mocule’s
card edge before installing the radio
modules in the carrier assembly.
3
Starting from the leftmost slot
(#1), insert each radio module
into the carrier assembly by hooking it
onto the radio module mounting rod.
Slowly swing the radio module’s card
edge into the card edge connector on
the back of the carrier assembly.
20
