MDW 9000 Compatibilty
After you have installed your MDW 9000 and understand the handset
controls and displays, use the programming and call handling
instructions that come with your communications system; follow the
user instructions for the phone type identified below:
PARTNER systems: the MLC-6 Cordless Telephone; the MDW
9000 is fully compatible with the PARTNER family of commu-
nications systems.
■
■
■
■
■
MERLIN, MERLIN Plus, and MERLIN II systems: a 5-button phone.
MERLIN LEGEND systems: a 10-button ATL set.
System 25: a 10-button ATL set.
System 75, System 85, and DEFINITY systems*: a 7303s set.
Carefully note the functional differences between your wireless
phone and the phone type identified above, as described in the
following sections.
If you have a fully loaded carrier assembly and the wireless phones
shares the same line appearance, it is recommended that you
program some of the wireless phones for Delayed Ring or No Ring.
Entering Station Programming
Mode
On all PARTNER, MERLIN, and MERLIN LEGEND systems:
■
■
To enter programming mode, turn on the handset, press [
Intercom
],
then press [
Feat
] followed by [
0
] [
0
].
To exit programming mode, press [
Feat
] followed by [
0
] [
0
] or turn
off the handset.
NOTE:
The above instructions do not apply on System 25, System 75,
System 85, and DEFINITY systems. On these systems, features
are assigned by the system administrator.
* For DEFINITY G3V3 systems, you can administer the system for the
MDW 9000 telephone (rather than a 7303s set) and follow the user’s
instructions in the MDW 9000 Wireless Telephone User’s Guide, order
number 555-230-768.
49
