manualshive.com logo in svg

AT&T DLC-100, Руководство пользователя, Страница: 17 / 72

Поделиться
Скачать
AT&T DLC-100 Скачать руководство пользователя страница 17

Keypad Features and Operation 

 

Digital Life User Manual

 

| 

Page 

7

 of 

62  

ATT-UM-V1.1-201303

 

 

System LIGHTs 

If the Armed (Red) LIGHT is ON, a LCD message will indicate the status of the 
System: Armed-STAY or Armed-AWAY. 

If the Ready (Green) LIGHT is ON, the system is ready for arming.  

If the Armed (Red) LIGHT is OFF and the Ready (Green) LIGHT is OFF, then the 
system is not ready for arming because one or more of the monitored devices, such 
a door or window sensor, is not in the closed state 

Numeric Keypad 

Use the Numeric keypad to enter your Alarm Panel PIN and Duress PIN, to confirm 
emergency button selections, and to access system functions.  

Function Buttons 

You can use the function buttons to select the STAY, AWAY and BYPASS features.  

Emergency Buttons 

The Emergency Buttons are used to send an emergency alarm directly to AT&T 
Digital Life Central Monitoring Center immediately upon being pressed and 
confirmed. The Emergency Buttons are functional whether the system is armed or 
not armed.  

Operating Your Keypad (SW-ATT-PAD2W) 

The Keypad (SW-ATT-PAD2W) is used to arm/disarm the system and obtain information 
concerning the status of the system. The system has three (3) primary states: 

•

  Ready to Arm – all of the supervised devices are in the closed state 

•

  Not Ready to Arm – one, or more, of the supervised devices is not in the closed 

state 

•

  Armed – system is in the Armed – AWAY or Armed – STAY mode 

 

 

Содержание DLC-100









































































Отзывы:

Нет отзывов