Appendix
91
Handset display screen messages
Screen display messages
Put in charger
The battery is very low. The handset should be placed in the
telephone base or charger.
Quiet mode off
The quiet mode is turned off.
Quiet mode on
The quiet mode is turned on.
Rec mem low
The answering system has less than 3 minutes to record.
Rec mem full
The answering system memory is full.
Ringer muted
The ringer is muted temporarily during an incoming call.
Screen all
Robocalls
You have selected the
Screen robot
profile option in Smart call
blocker.
Screen all
Unknown calls
You have selected the
Screen Unknown
profile option in Smart call
blocker.
Screened call
The Smart call blocker feature of the telephone has screened a call
and is putting the call through to you.
Setting Ans sys
The handset is playing voice guide.
SCB screening...
The telephone is screening an incoming call.
Speaker
The handset speakerphone is in use.
Voice guide set
Smart call blk?
After you install your telephone or power returns following a power
outage, the handset and telephone base will prompt you to set the
date and time. After the date and time setting is done or skipped,
the telephone base will then prompt if you want to set up the
Smart call blocker feature via voice guide.
To register HS...
...see manual
The handset is not registered to any telephone base.
To screen call
press [SELECT]
The system is recording a message. Press
MENU
/SELECT
to screen a
call on a handset.
Unable to call
X
Intercom failed.
X
You try to join a call when there are already four handsets on
that call.
X
You try to make a call when the handset is out of range.
XX missed calls
There are XX new calls in the caller ID log.
XX new messages
There are XX new messages in the answering system.