29
Multiple handset use
Intercom
Use the intercom feature for conversations between two handsets. This
feature is only available if you have at least two system handsets. You can
buy accessory handsets (AT&T model
BL102-0
) to expand your system.
Use a handset to initiate intercom calls.
1. Press
MENU/
SELECT
on the handset in idle mode to
enter the main menu. Press
q
CID
or
p
DIR
to scroll to
Intercom
, then press
MENU
/SELECT
.
2. If you have two system handsets, the handset shows
Calling HS X
(
X
represents the handset number). The
destination device rings and shows
HS X is calling
.
-OR-
If you have more than two system handsets, press
q
CID
or
p
DIR
to select a device, or use the dialing keys to
enter a device number (
1
-
5
). The handset shows
Calling
HS X
. The destination handset rings and shows
HS X is
calling
.
To answer an intercom call:
f
Press
PHONE/
FLASH
, or
/SPEAKER
on the called
handset. Both handsets now show
Intercom
.
To end an intercom call:
3. Press
OFF
/CANCEL
or places the handset back in the telephone base or
charger.
NOTES:
f
Before the intercom call is answered, you can cancel it by pressing
OFF
/CANCEL
.
f
If the called party does not answer within 100 seconds or if the handset is in use, on a call or out of range, the
calling handset shows
No answer. Try again.
.
f
Pressing
OFF/
CANCEL
or
MUTE/
DELETE
temporarily silences the intercom ringer.
f
You can only use one pair of handsets to make intercom calls at a time.
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there is a
two-beep call waiting tone.
• To answer the call, press
PHONE/
FLASH
. The intercom call ends
automatically. The party on the intercom call hears four beeps. Other system
handsets can also answer the incoming call by pressing
PHONE/
FLASH
.
Calling HS X
ECO
HS X is calling
ECO
Intercom
ECO
