SETTING SYSTEM OPTIONS
WARNING: Before setting system options, unplug the CAS's ac power
cord from its outlet.
Turn the CAS upside down and remove the four screws from each cor-
ner and set them aside.
1.
2.
3.
Turn the CAS right side up and lift the cover off.
Position the CAS so that the cartridge and/or cartridge slot is on the right
side (Figure 8).
Switch
Box 1
Switch
Box 2
Switch
Box 3
Cartridge
Figure 8
Positioning the CAS and
Locating System Option Switch Boxes
4.
5.
Locate the red switch boxes above the ac power cord inside the CAS
(Figure 8).
Follow the instructions below if it is necessary to change system options.
PERCENTAGE MARKUP
Switch Box 1 (Figure 9) is used to set the Percentage Markup and is divided
into two sides. Side A represents the first digit of the percentage markup and
Side B represents the second digit. In order for you to determine which
switches to set, follow the instructions below.
9
