24
9. Power Supply
WARNING
◇
NEVER connect the main unit to power other than DC24V
(allowable fluctuation is ±10%).
◇
NEVER insert the plug of the AD-32 (AD-33 or AD-34) AC
Adapter to an outlet other than AC 100-240V.
◇
NEVER use a power cable that is damaged, cut, broken, or
altered. Fire, electrical shock or burns may occur.
To purchase replacement power cables, contact an Authorized
ATAGO Distributor.
CAUTION
◇
NEVER plug the AD-32 (AD-33 or AD-34) AC Adapter in with wet
hands.
◇
When disconnecting the power cable from an AC 100-240V
outlet, be sure to remove by pulling the plug.
Pulling by the cable may damage the cable and cause fire or
electrical shock
.
◇
When connecting the AC Adapter AD-32 (AD-33 or AD-34) to an
outlet, be sure to connect the ground pin as well.
m
The main unit has no power switch. When power is supplied to the main unit, the
measurement value display illuminates and the Brix(%) measurement
commences.
(1) When the main unit is used alone
①
Confirm that the power (DC24V) input cable is properly connected to the main unit
and the DC24V power supply.
②
When the DC24V power is supplied, the main unit turns on and the measurement
value display will illuminate.
(2) When the AC adapter AD-32, AD-33 or AD-34 (optional) is used
①
Confirm that the main unit and the AD-32 (AD-33 or AD-34) are properly connected.
②
When the AD-32 (AD-33 or AD-34) power cable is plugged into an outlet, the main
unit turns on and the measurement value display will illuminate.
When the AD-32 (AD-33 or AD-34) is connected to an outlet and the DC24V is output,
a lamp will illuminate on the bottom of the AC Adapter
.
