9
3. Unpacking and Installation
(1) Configuration
The instrument is comprised of the items listed below.
①
Main unit and standard accessories.
②
through
⑥
are optional items and are included with the main unit if ordered.
Additional items can be ordered at any time. For details, please contact an Authorized
ATAGO Distributor.
①
In-line Brix-Monitor CM-800
α
(Cat.No.3564)
•
Main unit
•
Power (DC24V) cable: approx. 1m
•
O-ring (Silicon) ........................ 1
•
O-ring (EPDM) ........................ 1
•
Instruction manual (this book)
•
Inspection certificate
②
AC adapter AD-32 (Cat.No. 3527), AD-33 (Cat.No. 3528) or AD-34 (Cat.No. 3529)
The AD-32 is an adapter that converts AC 100V to DC24V for supplying power to the
main unit.
The AD-33 is an adapter that converts AC 110V to DC24V for supplying power to the
main unit.
The AD-34 is an adapter that converts AC 220-240V to DC24V for supplying power to
the main unit.
③
Sample inlet unit
IDF/ISO clamp union (ferrule), IDF/ISO screw union (screw), JIS Flange, small
diameter series compression fitting and hose connector are available. Refer to page
38 "19.Consumable Parts and Optional Items"
.
④
Recorder output cable
•
5m
（
Part No. RE-65374
）
•
10m
（
Part No. RE-65375
）
•
15m
（
Part No. RE-65376
）
•
20m
（
Part No. RE-65377
）
•
Optional length
（
Part No. RE-65378
）
⑤
RS-232C cable
•
15m
D-sub 9pin (Part No. RE-65330)
D-sub 25pin (Part No. RE-5677)
•
1 to 15m
D-sub 9pin (Part No. RE-65331)
D-sub 25pin (Part No. RE-5647)
⑥
Stand (Part No. RE-8607) for mounting the main unit and the AD-32 (AD-33 or AD-34)
•
Stand
•
Hexagonal-head bolts (M6×10) 8
•
Spring washers ....................... 8
•
Washers .................................. 8
(2) Unpacking
①
Unpack the main unit and confirm that there is no external damage.
②
Confirm that all parts of the main unit, accessories, and any optional units as
described in section "(1)Configuration" (
C
page 9) are included.
