Atag XL-W 105, Руководство планировщика

Страница: 17 / 81

17
Technical description
Boiler transport
The XL - W is a fully equipped compact
heating system, which has been pre - set
and tested at the factory.
The package dimensions for allappli-
ances are:
Width 750mm
Height 1200mm
Depth 800mm
This makes it possible to transport all
models in one piece through a normal
door.
The boiler can be moved using a fork - lift
or pallet truck.Unpacking instructions are
printed on the cardboard box. Please
follow the proposed steps.
Disassembly of panelling
The appliance casing panels can be
easily removed and this is recom-
mended while the appliance is being
installed. This limits the potential for da-
mage to occur.
Lifting and carrying precautions:
- Wear protective clothing and gloves
to protect from any sharp edges.
- The boiler has to be lifted from the
front with a forklift truck for transport.
Panelling should be attached and
secured with the supplied screw,
after assembly of the boiler, or after
maintenance works.
1. Remove the plastic strip.
2. Open the 4 upper folders, and remove the documentation and the condense
pipe.
3. Remove the carton inserts, remove the carton box.
4. Remove the wall plate from the back of the boiler (removing one screw),and re-
move the 4 screws on bottom part of the boiler.
5. Install the boiler on the cascade (with a fork lifter).
6. Install the boiler on the new wall plate (with a fork lifter).
7. Remove the water and gas plastic cap, connect the condense pipe,and follow the
installation manual.