Atag OX6211F, Руководство пользователя

Страница: 21 / 24

40
EN
41
EN
Changing the lamp
●
Danger of electric shock!
Before replacing any of the oven light bulbs, take the following steps:
● Switch off the oven.
● Disconnect the oven from the mains supply.
● Protect the oven light bulb and the glass cap by laying a cloth on the bottom of the oven
compartment .
● Bulbs can be purchased from the ATAG Customer Service.
Replacing the rear oven lamp and cleaning the glass cap
1
Remove cap by turning anticlockwise
and remove the metal ring, the sheet
ring and clean the glass cap . If neces-
sary, replace the bulb with a 25 watt,
230 V, 300 °C heat-resistant oven light
bulb . Clean the glass cap, the metal ring
and the sheet ring if necessary .
2
Fit the metal and the sheet ring to the
glass cap . Place glass cap where you have
removed it in step 1 and turn it clock-
wise to keep it in place .
Cleaning and Care (Continued)
Cleaning the top heater
1
Remove the upper nut circular by
turning it anti-clockwise while holding
the top of the heater . The front of the top heater inclines
downwards .
2
When the cleaning has been done,
lift the top of the heater back to its
original level and turn the nut circular
clockwise .
Cleaning and Care (Continued)