EN 24
Symptom
Possible cause
Solution
Symbol ‘flash’ on the
concerning control display.
The control panel is dirty or
has water lying on it.
Clean the control panel.
Error code E5 and E6.
Defective generator.
Contact the service
department.
Error code E2.
Appliance over heated.
The appliance has been
switched off because of over
heating. Let the appliance
cool down and start again
on a lower setting.
Error code U400 and/or
continuous beep.
The appliance has been
connected incorrectly and/or
the mains voltage is too high.
Let your connection be
changed.
‘Flash’ symbol.
You have pressed two or more
keys at the same time.
Do not operate more than one
key at the same time.
Error code Er47.
Communication error between
controls and induction
generator.
Verify connection of main
power is correctly and
functional. Other wise contact
the service departement.
Code F on downdraft display
(alternately with the selected
power.)
Grease filter 100
operating hours.
Clean the grease filter. Use the
downdraft clean function.
Code C on downdraft display
(alternately with the selected
power.)
Carbon filter 1000
operating hours.
Replace the carbon filter. Use
the downdraft clean function.
Other error codes.
Defective generator.
Contact the service
department.
TROUBLESHOOTING
Содержание HIDD9471LV
Страница 51: ...EN 27...