EN 26
Scenario conflict
This conflict occurs if the positioning of the pans on the hob is not clear. The conflict is always
shown on the display. Lift one or more pans until the problem is solved. The pans are seen as
newly placed pans; all settings that have been set for the pans are disappeared.
1+2
1+2
User Interface conflict
The display cannot correctly show the position of the pans on the hob. Move pans to solve the
conflict. Then you will be able to set the power level.
Attention
You can put max. 6 pans on the hob.
Pan conflict
The induction hob detects pans that are larger than 100 mm and smaller than 145 mm. But these
small pans cannot be used on every position on the hob. An induction coil needs to be covered
for at least 10% to be able to heat up a pan. If a small pan does not heat up on a specific
position, move it a little bit to a different position.
In pan selection mode, a small pan that is not on a correct position
shows in a grey color with an exclamation mark. Touch the exclamation
mark to show the info message.
CONFLICT MANAGEMENT
