Atag BrainQ RSC/2, Руководство пользователя, Страница: 49 / 75

GB
Page GB-13
HEATINGEND
selected cycle
TEMPERATURE
selected cycle
DAY-MONTH
TIMECHANGE
SUMMER - WIN-
TER
HEATINGSTART
selected cycle
Parameter 03
Separate operation
common (1)
separate (2)
Parameter 04
Summer ECO-
temperature
(Heating limit)
Parameter 11
Return to standard
display
back forward
back forward
back forward
back forward
back forward
Selection and modification of parameters
and setting values
When entering the programming level, the TIME-
PROGRAMS-level will always appear first. All other levels
can be selected with the rotary pushbutton (if necessary after
entering the required code).
The selected and flashing level is activated by touching the
rotary pushbutton, the first value or parameter flashes. If
necessary, it can be changed by means of the rotary push-
button and subsequently accepted by quickly pressing the
button once again. If necessary, the other parameters should
be treated in the same way.
Return to the previous step by means of button
¤ ¤
return to
standard display by using button
¢ ¢
or automatically after
approx. 60 seconds.
RESET
Factory setting
reactivate
back forward
Parameter 16
Domestic hot water
temperature
back forward
Parameter 27
Heating curve
adjustment (slope)
back forward
*) The settings for DHW are only visible when an external
cylinder with either a cylinder sensor or a cylinder ther
mostat is connected.
With combination boilers these settings are not visible.
8A520900_GB.qxp 12.11.2004 13:17 Seite 13