Atag BrainQ RSC/2, Руководство пользователя

Страница: 42 / 75

GB
The centrally arranged rotary pushbutton and the keys labeled with symbols facilitate ease of operati-
on. It is, however, recommended to read this manual attentively to be informed about the repeating
steps.
– Each changeable value flashes in the display and can be changed by means of the rotary push-
button. A flashing display is appropriately highlighted in this manual.
Turn to the right (+) in clockwise direction: increasing values
Turn to the left (–) in anti-clockwise direction: decreasing values
– Press briefly: Acceptance of the selected and indicated value, store.
– Hold depressed for approx. 3 seconds: Entry into the programming level (level selection)
If the value is not saved with the rotary pushbutton after an operation step, the value adjusted
last is automatically accepted after approx. 60 seconds.
Turn: select, change
Press: confirm, store
LCD display
The control is equipped with a large display, all information appears in plain text and several lan-
guages are available (see page 23).
During commissioning of the installation or after a power failure a segment test with automatic error
diagnostic takes place, followed by the short-term indication of instrument type and software versi-
on.
Standard display
The subsequently appearing standard display shows day, date, time and room temperature. The time
bar above the date specifies the heating times. * The display will be in dutch (NL) Refere to pages
12, 22 and 23 to alter display to english
Symbolism used in this manual:
Page GB-6
Operation
2211..55
1166::3322
WWEE 2255 JJUUNN..;;0033
°C
mm
0 2 4 6 10 12 18 22 20 8 14 16 24
Standard display
Actual room temperature
T1.30
RRSSCC--22
mm
Instrument information
Software-Version
b b
15.05.
8A520900_GB.qxp 12.11.2004 13:17 Seite 6