Asycube Largo A5 - Asyril SA
Operating Manual
©
Copyright Asyril S.A.
Introduction
v1.2
FO 32.03.118
Operating Manual
Asycube Largo A5
- Asyril SA
7/45
Temperature
The active elements into the asycube
make the surfaces shown on the
picture heating up to 45°C in nominal
use. This temperature can
nevertheless increase to 55°C in
extreme use.
It is the responsibility of customers to
document their own application and
instruct employees on procedures to
avoid contact with these surfaces
Figure 1-2 :Specific warnings
Warranty information
1.3.
You will find all the Asyril warranty information (duration, scope of warranty …) on the general
conditions of sale.
CE information
1.4.
The declaration of incorporation as a partly completed machinery can be found here below.
NOTE:
The partly completed machinery (Asycube) must not be put into service until the final
machinery into which it is to be incorporated has been declared in conformity with provisions
of this directive, where appropriate.
Refer to“5.2
" on page 43 for the complete CE Certificate of the asycube Largo.
